About falangerr

falangerr · 11-12-2015

Good day. I have problem in installing IPsec VPN between Cisco ASA-5515 and mikrotik 951. I want to use ikev1 only. Here it is my network: LAN 10.7.0.1/24 --> Mikrotik <-- WAN 2.2.2.2 <--INTERNET--> WAN 1.1.1.1 --> Cisco <-- LAN 10.6.0.254/24 Config ...

falangerr · 11-19-2015

Tunnel got up today, after three hours of reconfiguring devices. Result config are: Mikrotik:[admin@Brest-R] > ip ipsec peer export# nov/19/2015 13:02:46 by RouterOS 6.33# software id = PCMK-DBQQ#/ip ipsec peeradd address=1.1.1.1/32 dpd-maximum-failu...

falangerr · 11-18-2015

ASA# show version Cisco Adaptive Security Appliance Software Version 9.1(2)Device Manager Version 7.1(3) Compiled on Thu 09-May-13 16:20 PDT by buildersSystem image file is "disk0:/asa912-smp-k8.bin"Config file at boot was "startup-config" Few minut...

falangerr · 11-18-2015

Yes, you are. ASA Lan network 10.6.0.0/24 (interface name test) Mikrotik Lan network 10.7.0.0/24 Also you can see that there is no hits in nat translations. ASA# show natManual NAT Policies (Section 1)1 (TEST) to (WAN) source static NETWORK_OBJ_10.6....

falangerr · 11-18-2015

Ofcourse, ASA# show running-config natnat (TEST,WAN) source static NETWORK_OBJ_10.6.0.0_24 NETWORK_OBJ_10.6.0.0_24 destination static NETWORK_OBJ_10.7.0.0_24 NETWORK_OBJ_10.7.0.0_24 no-proxy-arp route-lookupnat (LAN,WAN) source dynamic any interface

falangerr · 11-18-2015

First of all. Mikrotik and ASA have global ip on their WAN interfaces. After changing order two nat rules - nothing changed. Second rule was created with help of ASDM through wizard, after that I checked it and as I see there is no mistakes in it.

Member Since	‎07-31-2015 06:24 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	16

User Statistics

User Activity

Cisco ASA 5515 + Mikrotik Site-to-Site IPsec VPN

Tunnel got up today, after

ASA# show version

Yes, you are.

Ofcourse,

First of all. Mikrotik and