About steinarrimestad

steinarrimestad · 08-01-2018

Hi. I have looked up and down on CCO and the supportforums to try and find some explicit definitions for each of the states for the DHCP proxy state machine, but have been unsuccessful. Or are you able to provide this or point me in the right direc...

steinarrimestad · 08-01-2018

Excellent! Just what we were looking for.Thanks!

steinarrimestad · 04-04-2016

Hi Aleksander. Thanks for this detailed writeup Do you have any SNMP OIDs that can be used for this monitoring you recommend such as - netio arp clients- xipc InputQ and PuntQ cur/high/max and dropped for arp- drop counters for ARP and ARP_EXCD- arp ...

steinarrimestad · 03-23-2016

Hi. should be no problem using the integrated 10Gs, just be aware of the NP distribution on these is shared with the MPA modules. RP/0/RSP0/CPU0:asr9001-1#show platWed Mar 23 10:05:57.384 CETNode Type State Config State------------------------------...

steinarrimestad · 08-05-2015

Hi You're listing in the document here that the following is not supported: The following topology options are not supported:Simple Ring with both ends terminating on same host Is there a plan for supporting simple ring with both ends terminating on ...

Member Since	‎08-05-2015 12:55 AM
Date Last Visited	‎02-23-2024 12:04 AM
Posts	3
Total Helpful Votes Received	5

User Statistics

User Activity

DHCP IPv4 Proxy binding STATE definitions

Re: DHCP IPv4 Proxy binding STATE definitions

Hi Aleksander.

Hi.

Hi You're listing in the