About datencio1

datencio1 · 11-09-2012

I have five Catalyst 2960-S-48FPD-L switches and needed to know if this SFP+ module will work in it: GLC-LH-SM. I have the the GLC-SX-MM modules in them now, which are working. However, I get no activity on the GLC-LH-SM modules. I have gone over...

datencio1 · 02-21-2011

Hi,Does anyone know what I need to mesh the Cisco Aironet 1131 series access points together. I have a few spread around a small campus and was wondering if this series is even able to be meshed & what components I'd need to make this happen?Thanks,...

datencio1 · 07-27-2010

I just reloaded my IOS to version to 12.4(21a)JA1. Everything seems to be working except for this problem that I have when restarting/rebooting the system: The system is not configured to boot automatically. Thefollowing command will finish loadi...

datencio1 · 07-26-2010

I have been trying to reload my IOS onto a Aironet 1300 Wirelesss Bridge, but I'm having issues with the FTP. Does anyone know if using the FTP is the best route, or if there are any know issues using FTP? This is the path that I'm using:archive do...

datencio1 · 07-16-2010

I've been having connection issues with my (2) Aironet 1310, which are setup in a bridge p2p mode. A few weeks ago we had a power outage due to a lighting storm. Well, it knocked out my non-root bridge (not connecting to the root). So I brought it...

datencio1 · 06-13-2012

Ok, I think I found out what the priblem is. It seems that from factory, the ports come locked. You have to go to Security>Traffic Control>Port Security and unlock each port. Click the EDIT tab on the port you want to edit. Then un-check the ENA...

datencio1 · 06-13-2012

BUMP.I kind of need to know the answer as well.

datencio1 · 08-05-2010

Thanks for you help, that seemed to get it working.Daniel

datencio1 · 07-30-2010

Thank you for your reply, but is there a certain model that this code works on or does it work on all models. Or do you have to be use a certain mode in order for it to work. I'm asking because every time I enter the command it error's saying that ...

datencio1 · 07-28-2010

I have upgraded the software to the highest possible version without having to purchase a contract. Also, as far as RMA, the bridge is out of warranty. Is there any other suggestions that you might have?Thanks,Daniel

Member Since	‎10-29-2009 09:08 AM
Date Last Visited	‎08-18-2017 03:57 AM
Posts	19
Total Helpful Votes Received	5

User Statistics

User Activity

Question??? Catalyst 2960-S-48FPD-L & Supported SFP Modules

Cisco Aironet 1131 & Mesh Networking???

Okay, New Problem on my 1310-BR!

Reloading the IOS... Use FTP, TFTP, HTTP????

Lost The Cisco Aironet 1310 Web Interface????

Port suspended on Cisco ESW-520-24P

Port suspended on Cisco ESW-520-24P

Re: Okay, New Problem on my 1310-BR!

Re: Okay, New Problem on my 1310-BR!

Re: Okay, New Problem on my 1310-BR!