About kpintens

kpintens · 05-24-2016

Hi Is there a reason why there is a difference in the output: On the active controller: Show license capacityLicensed Feature Max Count Current Count Remaining Count-------------------------------------------------------------------AP Cou...

kpintens · 06-10-2015

HiIs it possible to have mutiple streams from one server, eg 1 CUCM node (= 1 MoH server), 3 departments and each want their own MoH file Thanks Koen

kpintens · 02-26-2015

Hi allis it possible to configure 2 SIP trunks to the SBC of one SIP provider? The SBC has the same IP address and the only difference between the trunks would be the credentials.On a CUCM I can not add a second user in the same sip realm, so the cu...

kpintens · 02-16-2015

Hi allis there a way, without using transformation patterns to translate an incoming E.164 number to 4 digit internal numbereg +32 1456 789 3123 to 2501currently it is working using a transformation pattern on the trunk but using this method as soon ...

kpintens · 11-06-2014

Hi allI was wondering if we can do the following on 2 BE6000's1 BE6000 will host a PUB and SUB, the other one a second SUB and UnityConnection. The FAQ, states max 2 nodes but further down it says the cluster can hold more then 3..... Thanks in advan...

kpintens · 06-10-2015

3 device pools (3 departments)need 3 different MoH, how do I attach the streams to the device poolthink this is clear to me at leastso DP A, has MRGL A, MRGA... now how can I attach stream A to this

kpintens · 06-10-2015

so reading this correctly we use the priority to change the order, but what if there are more then 4 streams (since this is a pilot setup, but I heard that the customer wants to extend this to other sites)

kpintens · 06-10-2015

but how, I can create the streams but then I can't seen anywhere to attach them to the device pools(10.5 version CUCM)

kpintens · 02-26-2015

then it is provider issueI can re-formulate my questioncan I have 2 authenticion names in the registrarin the same SIP realm?

kpintens · 02-26-2015

2 SIP trunks for redundancy

Member Since	‎01-11-2006 02:59 PM
Date Last Visited	‎01-16-2020 02:12 AM
Posts	93
Total Helpful Votes Received	20

User Statistics

User Activity

difference in license usage on Wireless controller

MoH streams

CUBE configuration - 2 SIP trunks one Provider

E164 dialling to internal number

BE6000 CUCM setup

3 device pools (3 departments

so reading this correctly we

but how, I can create the

then it is provider issueI

2 SIP trunks for redundancy