Hi all,
The title kind of says it all. We are running PI3.1 on a HA setup (2xGEN2 appliance).
PSIRT job runs fine, but on export to PDF or CSV, the following notification is given "Access is denied to Prime Infrastructure. Please contact the netw...
Hi all, Just looking for some quick confirmation from the experts here: I currently have a VSS setup with 2 4510's and SUP7-E modules running production.The VSL link is connected via 2 TenGig interfaces on the Supervisor board. We will have to perfor...
Hi Guys, Running into the exact same issue, WLC HA pair reloaded, after reload HTTPS server is not working anymore.if I disable http secure-server, I can log into GUI using HTTP.Removing http server and http secure-server and re-applying did not solv...
Thank you for your quick reply Madhu, greatly appreciated!I would have thought so that no impact would be seen, but because it is the first time we will perform maintenance on our VSL, I want to better be safe than sorry. Thanks again,Colin
This is not advisable.first off all, you will have a larger than needed vlan database.Secondly, this will make you have to configure all VLANs seperately on all switches, or make use of VTP.
