I am trying to configure IP SLA on a 2851 router (source) and a 3750 (stacked) (responder).  I have followed the setup instructions in the following documentation.http://www.cisco.com/en/US/docs/ios-xml/ios/ipsla/configuration/15-0m/Configuring_Cisco...

Have a really simple question I know it is possible to put multiple IPs' on the outside interface of the PIX, will the standard ip address outside XXX.XXX.XXX.XXX XXX.XXX.XXX command work? And if I use that will it erase the ip address I already have...

I need to set up a static NAT for a surveillance camera on our network, so that it can be viewed as a demo to some people. camera ip: 10.8.xx.xxx 255.255.255.0public ip: 64.207.xx.xxx I have just started dealing with a PIX so any help would be app...

I have a group of users set up for VPN they can connect into the network without any issue, but while connect with the VPN they cannot access the web. They are part of the same vpn pool as another group and that group doesn't have a problem, but the...

I need to allow traffic in and out through port 5003 for a couple of credit card machines we have. I created the access-list below access-list test2 permit tcp any host xx.xxx.xx.xxx eq 50003It still will not allow it to connect to the credit card c...