Hi All, Trying to wrap my head around this high priority issue that accidentally happened. I thought it was pretty safe practice to add a new vlan to existing trunk port by using the 'switchport trunk allowed vlan add <vlan>' command, however this br...
Hi All, Have a peculiar issue with an eBGP session on a point to point link betwen two C9500 devices. This was working up until now and there has been no configuration change at either end. Now it keeps dropping off at 45 seconds. Other eBGP and iBGP...
Hello, We have a couple of OCSP responder certificates expiring after 60 days. When I check the 'Issued by' column it has the name of one of the other node on it, which is the PAN. However, I am at a loss about how do I go further to renew it. There ...
Hi All, Hoping there is a simple answer to this that I am missing. We have had site bandwidth upgrade for a few customer sites recently and I successfully applied either the Performance or Boost license as per bandwidth and CIR requirement to each si...
Why does it show 0 packets for some of these and doesn't even have bytes count? That's where it's not clear to me.
Class-map: AutoQos-4.0-Output-Priority-Queue (match-any)0 packetsMatch: dscp cs4 (32) cs5 (40) ef (46)Match: cos 5Priority: 30% (300000...
Need to bring out logs from Syslog with buffer overwritten to an extent, but I found below log message when I removed the newly added vlan and services restored: %SPANTREE-2-LOOPGUARD_UNBLOCK: Loop guard unblocking port Port-channel1
Yes it was a bit of a rookie error.@balaji.bandi wrote:you always need to add VLAN in the switch before adding to port-channel both the side of the switch.VLAN was added before hand, no issues. Also my access didn't restore until I removed the added...
Hi @Arne Bier , Thanks again. I did go through the renewal process which seems to be just a single click with no selection of nodes required. It's been about an hour now and the certificates are still displaying an old expiry date, though it did sugg...
Hi @Arne Bier , Thank you! I didn't notice your response and was wondering how to go about this. So basically this will renew it same as self-signed certificates it seems. I will give it a go sometime today. Correct me if I am wrong but I think busin...
