Can anyone tell me what the time conversion is (secs,msecs etc) for the topology change counter/time (in bold italics) and if it can be changed to something more readable like on the 3700's.VLAN0982 is executing the rstp compatible Spanning Tree prot...
I have recently moved my Cisco account across to a new email address. After I have ogged in using my new address and attempt to reserve a CML sandbox (or any other) I get the VPN credential emails to my old account which will no longer be in use.I ha...
I have recently moved my Cisco account across to a new email address. After I have ogged in using my new address and attempt to reserve a CML sandbox (or any other) I get the VPN credential emails to my old account which will no longer be in use.I h...
I would like to know if there is a way to connect to the CML sandbox using the native Windows VPN connectivity tool rather than an instaled application?I only have a works laptop and there is no VPN software (just native Windows config) and as it's a...
This is not really a question, but just an observation and complaint.When I connected to the DevNet CML sandbox I used my installed Anyconnect, when connecting it downloaded the newer version form what I am running (4.8 to 4.9). Due to the fact I was...
That does work, but it gives a lot more output then a standard IOS device:It gives separate lists with details unlike the IOS version which gives a full summary list only. I guess this is by design and this should suffice and I will have to use the '...
I have managed to resolve the issue:It seems there was an aditional package from the 5.3.3, that was not in use but activated and is not availble in the 6.6.2 version.isk0:asr9k-asr901-nV-px-5.3.3 - I verified that this was missing from the 6.6.2 rel...
Thats a useful suggestion, I did try to to test all packages at once but got differemt errors.I have just tried the command suggested - admin install activate *6.6.2* test This is the output show:RP/0/RSP1/CPU0:dkccqrt20nt03fm#admin install activate ...
Thats great, I didnt try to test all packages at in one go, I was going to test one by one, which is not possible.OK everything seems to pass. So I assume after this, it will upgrade and auto reload and then thats the end of the job..?If thats the c...
OK, so its going - Slowly... I have worked out all what I need to do so far, although I am getting some errors thrown at me, when installing the packages:--+Install operation 50 '(admin) install activate disk0:asr9k-mini-px-6.0.2 test' started by use...
