About yllw98stng

yllw98stng · 02-29-2016

Is it possible to configure DHCP Option 184 on the DHCP Server in the RV320? Thanks!Jason

yllw98stng · 01-22-2015

We have a network which consists of primarily Cisco 3560X switches and Meraki MR34 wireless access points. We have a handful of VLANs setup. In one instance, a WAP was plugged into an unmanaged SD100D-08 switch. I would have expected this to "brea...

yllw98stng · 03-07-2013

We currently have a Headquarters with 10 branch offices. Headquarters has an ASA 5510 (8.2.5) and each of the branch offices has an ASA 5505 (8.2.5).Currently, internet traffic from the branch offices is routed straight out to the internet, while tr...

yllw98stng · 01-18-2012

I have an ASA 5505. I have configured Remote Access VPN so that users can connect to VPN and access my main VLAN (Inside). I would like to secure it so that when a user VPN's in, they are only allowed access to the HVAC vlan (Vlan 2) as seen in my ...

yllw98stng · 01-22-2015

Thanks for the quick response Jon. I have continued with my testing and connected two 3560X switches together with the same unmanaged switch in between them. I configured the 3560X ports as trunk ports and am able to pass all VLANs between the two 3...

yllw98stng · 03-07-2013

Thanks for the response Jouni. It will give me a good starting point and a lot to think about. To answer your question about Websense, we currently use WCCP on our core switch to transparently redirect all HQ traffic through the Websense Appliance...

yllw98stng · 01-18-2012

Ok, I added the Gateway on the workstation as 172.16.128.1 and I'm NOW able to ping it from my vpn connection! Thanks so much for your help!

yllw98stng · 01-18-2012

Now that I think about it, the second nic in that machine (the one not connected to the ASA) definitely doesn't need a gateway because it is connected to a HVAC controller.Will it work to put 172.16.128.1 as the Gateway on the nic connected to the A...

yllw98stng · 01-18-2012

The workstation is configured as follows:IP: 172.16.128.5Subnet: 255.255.255.0GW: Blank (This computer has 2 nics)Should I be able to enter 172.16.128.1 as the Gateway?

Member Since	‎01-18-2012 10:10 AM
Date Last Visited	‎07-18-2018 12:03 AM
Posts	15

User Statistics

User Activity

Configuring DHCP Option 184 in RV320

Extending VLANs over an unmanaged switch

Routing all traffic over a Lan-to-Lan VPN

Allow VPN users to access a different VLAN

Thanks for the quick response

Routing all traffic over a Lan-to-Lan VPN

Re: Allow VPN users to access a different VLAN

Allow VPN users to access a different VLAN

Allow VPN users to access a different VLAN