From time to time we receive calls into TAC about the mgmt0 interface showing as “Administratively down” from NX-OS. Since the beginning of time, this has been expected behavior due to the platform design architecture on 1st, 2nd, and 3rd Gen FI’s.T...
Hi Walter, thanks for your question!
Fair warning, I'm not an expert at troubleshooting these types of scripts, but I'll certainly do my best to help. Worst case scenario is engaging our DevNet team directly, and those folks are great at this stuff...
Hi Torsten,
I'm sorry for the delay in someone getting back to you on here, and I'm happy to do my best and assist.
Does your customer fit into all of the conditions below? This has been required for us to see this defect hit.
1) platform is eit...
Hi There,
I noticed that you've yet to receive a reply to your post, and I want to help. If you've already engaged TAC directly or resolved this, please let me know, and I'll stand down.
If you're still in need of help, I have some thoughts around...
Hi Christopher,
Indeed, this took some digging, and the good news is I found it buried within the C220-M4 spec sheet. Here's a link to the spec sheet I used, and the PID is: UCSC-PCI-2C-220M4=.
Does this help?
Best,
Mastin
Hi Ricky,Have you taken a look at these VMware articles?http://pubs.vmware.com/vsphere-51/index.jsp?topic=%2Fcom.vmware.vsphere.troubleshooting.doc%2FGUID-3662595F-8E4C-452E-AEEC-3393E46293BC.htmlhttp://kb.vmware.com/selfservice/microsites/search.do?...
