Bug in firmware 1.2.0.14, Cisco support provided me with beta firmware that fixed the problem.------original-post------ Hi,I have a Sierra 320U USB dongle (banded Netgear/Telstra) connected to an RV215W with firmware 1.1.0.5 but if I upgrade the RV21...

I have this working and it apears to work. My question is why/how is it working without nbar? I don't have nbar turned on (and do not whish to) yet it matches protocol ipsec. This is what I have setup and the goal is;1. Not drop ipsec traffic from an...

Hi, I am trying to set the tx-ring-limit on fastethernet0 interface to 2 but it defaults to 16.I am configuring QOS for voice, I done tx-ring-limit tuning before on atm interfaces without any problems usually set to to 2 or 3.Cisco reference https://...

Hi, I am trying to limit internet traffic fllooding the link by policing it but I cannot get it to match any packets on interface atm0.1.Any ideas? Thanksclass-map match-any VOICE match  dscp ef match  dscp cs3 match  dscp af41 match access-group ...

I am trying to shape traffic from hub site to slower spokes sites. I want to stop the hub site trying to send at a greater rate than the spoke can accept. An example would be copying a 10m file from hub to spoke.I have two examples below; example 1 g...