About Timothy Abbott

Timothy Abbott · 02-12-2016

Hi Greg,The supported number of policy sets in ISE 2.0 is 20.Regards,-Tim

Timothy Abbott · 02-12-2016

Asif,You can accomplish this by sending RADIUS syslogs from ISE to Solarwinds. ISE sends a URL-Redir...

Timothy Abbott · 02-08-2016

Hi Michael,Without authentication that will be challenging to do. One possibility is if all the deve...

Timothy Abbott · 02-04-2016

We haven't tested that supervisor with ISE so we wouldn't be able to tell you the level of support. ...

Timothy Abbott · 02-03-2016

Device Types are groups you have to configure. You can name them whatever you want i.e. Device Type:...

Timothy Abbott · 02-03-2016

You can configure ISE to send an email notification if the "Excessive Failed TACACS Authentication A...

Timothy Abbott · 02-03-2016

That would be a feature of Prime Infrastructure.Regards,-Tim

Timothy Abbott · 01-13-2016

Yes, a PSN.Regards,Tim

Timothy Abbott · 01-11-2016

Dan,I'm pretty sure that if you set a discovery host, the NAC agent will attempt to connect to it on...

Timothy Abbott · 01-11-2016

No problem, Dan. I don't believe the default behavior can be changed as that is hard coded but you c...

Timothy Abbott · 01-11-2016

Hi Dan,By default, the NAC agent requests the default gateway IP address. For example, http://192.16...

Timothy Abbott · 01-11-2016

Hi Flavio,If an endpoint was dynamically profiled in ISE and then that policy used in authorization ...

Timothy Abbott · 09-04-2014

Hi Justin,Node groups are primarily used for redundancy for sessions that are in posture pending sta...

Date Registered	‎12-15-2011 10:05 AM
Date Last Visited	‎04-15-2021 08:56 PM
Total Messages Posted	649
Total Helpful Votes Received	465

Re: How many policy sets does ISE 2.0 support?