Dear,
We are trying to setup a self-registration portal using ISE 2.3 Patch1 and Cisco WLC 8.5.103.0.
On our customer side we have a same-like setup using the Guest Portal of ISE2.1 and Cisco WLC 8.2.161.0.
When any client connects to the WLAN,...
Dear all,
I have a strange issue I can't clarify, I have build an Catalyst 3850 switch stack, with 3 3850-24P and 1 3850-12S switches.
Switch Ports Model SW Version SW Image Mode------ ----- ----- -----...
Hi all,Currently I'm facing a weird issue within the Plug and Play application of APIC-EM.I had pre-provisioned a switch-stack and when the device still had the status 'Provisioned', I factory defaulted the stack and removed the master-switch (On whi...
Through our monitoring system we saw an peak in the CPU usage on one of our C3850 switch stacks. We have now found out that switch one of the two, is running constantly on 99% usage for core 4.
I have already found out that the high core usage is on...
I also do think you hit the BPDUGuard functionality. You say you can confirm the interface on your side is in errdisable state?
Please look into the logging of your switch:show log
and see what caused this issue, spanning-tree portfast will not be ...
After opening a TAC case I found out that you need to configure the Flexconnect ACL's also in order to have this working correctly.
Luckily the Cisco documentation doesn't explicitly mention this in their 1001 manuals for these configurations.
Fo...
Dear Abraham,
Thanks for the response.
I have checked the correct names multiple times, in both setups.
I even have deleted and re-made the ACLs multiple times.
Any other ideas, I do think this issue is related to ISE2.3 as I don't have this ...
Hi Iulian,
I have been waiting for other answers, but as they likely are not coming, I think we should do it with our investigation :)
Your last reply seems logical to me, looking at the processes running currently I see there is now a higher load ...