Hello,Does anybody know if I can initiate AnyConnect VPN session using SRV instead of an IP address or FQDN?Thanks in advance.Remy

Hi,I have a one chassis Catalyst 6504-E with 2 x SUP-720-10G working in SSO mode. My understanding was that the supervisor WAN interfaces are only configurable on the active supervisor and they are replicated to the standby supervisor. It looks like ...

Hello, I'm observing a strange behavior on the router while VPNed with ASA. I have a simple site-to-site VPN between a router 1921 (remote site) behind NAT and with dynamic public IP address on the modem and 2 ASA5525's in Active-Active configuration...

Hello everybody,   While preparing a test bed for a customer before implementing PfRv3 solution I stumbled upon quite odd behavior of the border routers when an TCA is generated after simulating an impairment on the WAN network.   At the moment I hav...

Hello everybody,   While preparing a test bed for a customer before implementing PfRv3 solution I stumbled upon quite odd behavior of the border routers when an TCA is generated after simulating an impairment on the WAN network.   At the moment I hav...