My customer has 20 locations with 20 different phone numbers (SIP accounts) and wants to dial into PSTN via one SIP gateway that is connected to one SIP provider with one SIP realm. Now the provider wants an authentication for outgoing calls that mat...
I am using the following scenario:Fax --- Cat65/ 24-Port-FXS --- CallManager 3.1 --- C3600/ HDV-E1 --- PSTN (S2M)FXS board and router are running H.323. I am running 6.2(3) on the Cat and I tried 12.2(5), 12.2(6a), 12.2(6b) and 12.2(7) on 3600. I con...
Hello Daniel, thanks for your reply. Our problem is, that we do have only one realm and need multiple authentications. Your Link would solve our problem, but it works only on an ASR1000, right? Unfortunately, we do have only an ISR4300 for the custom...
Well, we have to do it with H.323, so I put everything to fax relay now, running 12.2(7a) on the gateway. Are all of the features of 12.2(2)XN integrated in 12.2(7a) or might this XN version be the better choice?
Thx, but we are using 3.1(2c), and we still have the problems with fax relay as well: e.g. incoming fax is disconnected after 4 of 6 pages, outgoing fax disconnects after 5 of 20 pages, ...
Sorry, just a bit confusing: I am using the discribed IOS software on the 36xx Router that makes the gateway via E1 to PSTN. On the CatMSFC I am running 12.1(3a).Tom
I have very similar problems on a Cat65 with 24-port FXS module: I am running 6.2(3) on the Cat and I tried 12.2(5), 12.2(6a), 12.2(6b) and 12.2(7) on MSFC. I configured fax passthrough, bit I also tried fax relay.The problem is that sending faxes go...
