donlerche
Level 1
Level 1
Member since ‎10-04-2005
‎02-16-2021

User Statistics

  • 25 Posts
  • 1 Solutions
  • 9 Helpful votes Given
  • 10 Helpful votes Received

User Activity

I have an FWSM in routed mode with 31 contexts and appear to be hitting a limit with VLAN interfaces (I've counted up and have around 115). If I add an interface to a context then name it with "nameif" the context stops passing traffic, removing with...
Have a very strange problem with a 2821 installation and wonder if anyone has seen this or something similar before?The original symptom was when configuring an IP address on a LAN port sub-interface, BGP would flap on the WAN. Since then all hardwar...
Wrote a TCL script to save the output from a show command into flash every 1 min (so I could monitor the noise on an ADSL connection). I open the file with an "a" for append option, write the output, then close. Tested on a 2811 and worked a treat wi...
Wrote a TCL script to save the output from a show command into flash every 1 min (so I could monitor the noise on an ADSL connection). I open the file with an "a" for append option, write the output, then close. Tested on a 2811 and worked a treat wi...
With telnet, you can get to another device by simply entering the destination IP address without prefixing with the command "telnet". As we are in the process of disabling telnet and replacing with SSHv2, is there any way of allowing ssh connections ...
Community Statistics
Member Since ‎10-04-2005 04:47 AM
Date Last Visited ‎02-16-2021 09:17 PM
Posts 25
Total Helpful Votes Received 10
Helpful Votes From
Helpful Votes Given To