Hello Community,
Our ACI starter-kit was working fine until i decided to do a factory reset and start the config again from the scratch.
My problem now is that our leaf switches are not discovered anymore by the apic did some check and i can confirm...
Hello our customer need to pass a 1500 packet size with df set between 2 site connected via Ethernet over MPLS over GREi configured the interface connecting the ASRs between them r with the max MTU value but it doesn't work.
It's working now, i had to give the the infa vlan 4001 that was used for the first installation.
it means that even if did the reset factory of the apic many times and i gave different infra vlan but the apic kept using the vlan 4001
it might be a bu...
Hello Michael,
Thank you for your response
the leaf switch dont have any vlan on it as i reset it many times
module-1# show system internal eltmc info vlan summary
VLAN Summary Control BD: 0 User BD Count: 0 Extrn BD Count: 0 FD Count: 0 FD VXLAN C...
Hello again Thomas,
actually the clock is in synch
i see something strange when i was looking on the summary of the interface that connect my leaf to the apic,here is the output
(none)# cd /mit/sys/lldp/inst/if-\[eth1--1\]/(none)# cat summary # LL...
