About afradalil

afradalil · 03-27-2018

I have EEM applet scripts configured to apply some commands to help with failover scenarios in the network, my concern is the logs that generated continuously informing about the actions. Based on the configuration EEM applet is monitoring the interf...

afradalil · 03-29-2018

Georg, Thank you for your time and effort.

afradalil · 03-28-2018

Georg Thank you so much, the commands you provided did work to make the detailed actions go away but I still see the following: 846329: *Mar 28 14:55:20: %SYS-5-CONFIG_I: Configured from console by on vty1 (EEM:Interface_Intersite-Traffic_Back)846330...

afradalil · 03-28-2018

Georg,Did you get a chance to look at the configuration?

afradalil · 03-28-2018

Hi Micha, I am still not clear on where block prefix-list comes into account, I only see Send_12(13)_too added to the route-map. And in George's example. He added the two addresses in the same access-list Send_12(13)_too

afradalil · 03-27-2018

Hi Michal:- Try to remove the summary-only option and test- one question i have, is where do you have the following prefix list applied "ip prefix-list Block_12(13) permit 11.11.13.11/32"? all I see is your suppressed prefix applied to the suppress-...

Member Since	‎06-27-2017 08:21 AM
Date Last Visited	‎04-02-2018 09:05 AM
Posts	7

User Statistics

User Activity

EEM Log Issue

Re: EEM Log Issue

Re: EEM Log Issue

Re: EEM Log Issue

Re: Change to suppress-map for BGP aggregate does not take effect

Re: Change to suppress-map for BGP aggregate does not take effect