About rishabh.sharma

rishabh.sharma · 12-06-2018

I am using four SG300 52 ports switches and one SG300 24 port POE switch for around 150 clients. I have been observing the random reboot of all these switches at the same time from last 2 months. Three 52 port switches are up-linked at one 52 port sw...

rishabh.sharma · 08-10-2019

Yes, it worked for me. You also have to disable Bonjour forwarding on all the switches along with IPV6 addressing.

rishabh.sharma · 08-10-2019

Yes, it worked for me. You also have to disable Bonjour forwarding on all the switches along with IPV6 addressing.

rishabh.sharma · 12-12-2018

Hi Daniele, No we are not using IPV6 in our network. I have disabled it on all switches. I will monitor it for sometime and post my observation. If issue comes again, i will contact Cisco. Thanks for your help.

rishabh.sharma · 12-07-2018

Due to this issue i have already updated the firmware from 1.4.2.4 to 1.4.9.4 on all the switches. But issue is still there. This is what i found on logs: 21474682642018-Dec-06 17:38:06Emergency%SYSLOG-F-OSFATAL: FATAL ERROR: IP6C: ABORT DATA excep...

Member Since	‎07-19-2017 05:01 AM
Date Last Visited	‎08-15-2019 11:36 PM
Posts	5

User Statistics

User Activity

Cisco SG300 switches rebooting itself

Re: Cisco SG300 switches rebooting itself

Re: Cisco SG300 switches rebooting itself

Re: Cisco SG300 switches rebooting itself

Re: Cisco SG300 switches rebooting itself