Ed Lo
Level 1
Level 1
Member since ‎07-21-2017
‎11-15-2017

User Statistics

  • 57 Posts
  • 0 Solutions
  • 71 Helpful votes Given
  • 0 Helpful votes Received
Recent Badges
20 Replies
10 Replies
5 Replies

User Activity

Hello, I'm using a 1941w router and recently added a EHWIC-D-8ESG-P which has 8 ports. I had planned on splitting them into 2 different wired networks. To do this I was going to bridge 4 ports together. I attempted this with the 2 ports that the 1941...
Hello, I want to block ports from certain networks. For example network 10.10.10.0 cannot connect to port 80 but can connect to port 25. I've been trying to do this by just blocking port 80 but it still goes through. I have local web server set up on...
Hello, I have 2 wireless networks and want to add a password to 1 of them. I've tried doing it on my own and when I try to connect it says 'cannot connect to network'. Below is how I've been doing this, what am I doing wrong?   dot11 ssid test1vlan 2...
Hello, I'm using a 1941w router. Is it possible to have a network be used across both of the gigabitethernet ports that it has? So for example if I make a DHCP pool with a range of 192.168.22.0 would I be able to apply it to both GE0/0 and GE0/1?   t...

ACL

Hi, I have 2 subnetworks and I want to seperate them so that they cannot communicate with each other. Below is how I have tried to do it but, it doesn't work as when I attempt to ping from one to another it still goes through. Am I missing something?...
Community Statistics
Member Since ‎07-21-2017 10:03 AM
Date Last Visited ‎11-15-2017 12:06 PM
Posts 57