About CSCO12099251

CSCO12099251 · 02-07-2018

Hi All, Is there any command for snmp to send traps when temperature raise or fall from defined threshold on ASR100 series router? or Is this something happen by default by enabling 'snmp-server enable traps alarms' command? Regards, Godwin. S

CSCO12099251 · 01-28-2018

Hi All, Hi, I have a silly question. If I have L3 switch with VLAN 10 SVI enabled for OSPF without passive. I have 2 neighbor routers and a firewall on same vlan (via access ports). However I want not to send multicast only for port connecting to fir...

CSCO12099251 · 12-13-2017

Hi, With respect to bug in below link, Is there any way to check and confirm if the switch IOS had been installed by setting boot variable and reload instead of install all? Bug: https://bst.cloudapps.cisco.com/bugsearch/bug/CSCuy08068/?referring_s...

CSCO12099251 · 10-19-2017

Hi All, Can please advise if any snmp OID there to monitor SPAN destination port. Regards, Godwin. S

CSCO12099251 · 10-15-2017

Hi, Can someone advise on if C6840-X-LE-40G supports FHRP, as I have found below from data sheet "High availability: Two Cisco Catalyst 6840-X Series Switches can be combined into a VSS. In addition to high availability VSS, provides ease of operat...

CSCO12099251 · 01-28-2018

Hi Reza, Understand that L3 switch does not see any packets from Firewall as firewall is not running OSPF. But what about on Firewall side, will firewall see ospf packets from L3 switch, as OSPF is enabled on switch side?

CSCO12099251 · 01-28-2018

Hi Reza, Thanks for your reply. My question is simple as below. If I want to disable OSPF hello messages from particular ports from a VLAN, how to achieve it? I know if we want to disable it for complete VLAN, then we can do it by 'passive interfac...

CSCO12099251 · 10-30-2017

Hi Seb, I have got a situation reg DHCP snooping. Lets say below is my topology. Router A (L3 with DHCP pool configured. DHCP snooping disabled) | | | Switch B (L2 switch (trunk links)-DHCP snooping enabled: trust Router A link and u...

CSCO12099251 · 10-19-2017

Hi All, Will SNMP trap work on SPAN destination port? Regards, Godwin. S

CSCO12099251 · 10-19-2017

Dear Manish, Can SPAN destination port be monitored for snmp link status? Regards, Godwin. S

Member Since	‎03-23-2017 08:04 AM
Date Last Visited	‎03-20-2018 10:58 PM
Posts	38
Total Helpful Votes Received	5

User Statistics

User Activity

Cisco ASR1000 _ SNMP traps for temperature

OSPF packets on L2 port

Nexus IOS upgrade by setting boot var and reload

SNMP MIB to monitor SPAN destination port

Cisco C6840-X-LE-40G support on HSRP

Re: OSPF packets on L2 port

Re: OSPF packets on L2 port

Re: DHCP snooping only at client side

Re: Your welcome.

Re: span port shows up and down.