About crowden

crowden · 05-31-2017

Good evening everyone, I have had the misfortune to have never run into a SF300-48 before recently. It is a doozy of a CLI and GUI. I can't seem to get my ShoreTel phones and LAN working simultaneously and the configuration of this device is counte...

crowden · 03-23-2017

Good afternoon everyone, I'm configuring DHCP on a 3750 (BPSW1) and it works if I configure trunks or plug a VoIP phone in to a local port of BPSW1. However, I have a need for layer 3 switches to be tossed in named (BPSW2) and (BPSW3) for example. ...

crowden · 03-23-2017

Gentlemen, Thank you very much for the assistance. Learning has occurred and I'm in the process of changing and testing the configs now. Thanks again Christian

crowden · 03-23-2017

Ahhh I see. Does VTP also operate over L2 interfaces then? There must be a way to configure VLAN connectivity over Layer 3 connections and have DHCP work right?

crowden · 03-23-2017

Hey Rick, Here are the configs: BPSW1#show runBuilding configuration... Current configuration : 3034 bytes!version 12.2no service padservice timestamps debug datetime msecservice timestamps log datetime msecno service password-encryption!hostname ...

crowden · 03-23-2017

This is a test environment and these DHCP scopes do work correctly. After configuring layer 3 between the switches, utilizing EIGRP and applying the ip-helper command I am receiving DHCP request timeouts. Of course I can manually configure the devic...

crowden · 03-23-2017

I am. The configs are as follows: !router eigrp 1 network 172.16.41.0 0.0.0.255 network 172.16.42.0 0.0.0.255 network 172.16.43.0 0.0.0.255 network 192.168.120.0 0.0.0.3 network 192.168.120.4 0.0.0.3 network 192.168.120.8 0.0.0.3 network 192.168.120...

Member Since	‎03-23-2017 12:57 PM
Date Last Visited	‎08-18-2017 03:57 AM
Posts	7

User Statistics

User Activity

SF300 VLAN DHCP disconnect

DHCP IP helper not working

Gentlemen,

Ahhh I see.

Hey Rick,

This is a test environment

I am. The configs are as