Hello dear allI have a dude. I already configured IP SLA just to verify l2tp tunnerl each 5 seconds. However i saw on show ip sla statistics that "Number of successes" is being reseted each periodic timeI have the following configuration...
Hello everyoneI have been trying to enable netflow on my cisco switch 3750, but i cant find the commands to do it. I was searching on the web and im not sure if it is not supported this feature on the switch.
Hello everyoneI have been checking the following Log on 2900 Router:Nov 28 09:10:28.582: Se0/1/0 PPP: Using default call directionNov 28 09:10:28.582: Se0/1/0 PPP: Treating connection as a dedicated lineNov 28 09:10:28.582: Se0/1/0 PPP: Session handl...
Hello dear all!!I have the following topology::Cisco 3845 gi0/0 ----- Foundry Switch---- fa0/0 Cisco 7206VXR***CISCO 3845***interface GigabitEthernet0/0 ip address 192.168.80.90 255.255.255.128 no ip proxy-arp ip accounting output-packets duplex fu...
Hello everyone
I have a Cisco router C1700 and it is presenting unknow errors on Serial 0/0 and fa0/0 interfaces.
Does anybody have an idea why this counter is increasing?? Im not very sure if is by CDP neighbors or Vlans that are not configured on...
Hello RickThe interface serial 0/1/0 is working without any problem and ther's no any debug command running.Im not very sure if Log messages were generated automatically or any debug command causedRegards
Hello dear CarlFor your question you it deppends of your configuration.If you don't have any QoS method the interface will be saturated.A normal value on an interface cold be like this reliability 255/255, txload 1/255, rxload 1/255If the interface...
