About Jose Ignacio Leite Neto

Jose Ignacio Leite Neto · ‎06-24-2017

thanks for this! adding NULL to DIRECTORY PLUGIN CONFIG on the export/import .csv is the best way to remove LDAP active users.

Jose Ignacio Leite Neto · ‎04-05-2017

this is a bug, which happens since version 3.x .... yes ... 3.x anyway, what happens is that TFTP cache some files into the memory, even restarting the TFTP service does not clean such cached files from RAM. maybe restarting the server (since that will clean the memory and make the file get cached again). apparently TFTP cache some files to make it promptly available to phones, this is useful when you have a massive firmware upgrade for example and you have several phones requesting the firmware (.bin files). if the file is cached the server does not need to read such files from disk but it does from the cached file on RAM memory instead, as we all know RAM is much faster than disks. what happens is that ringlist.xml is one of those files. my case i went from version 8.5 to 11.5, here is how i fixed. 1 - got all the files from 8.5 (ringlist.xml, DistinctiveRingList.xml and all files with the .raw extensions) 2 - uploaded all files manually to the new CUCM (version 11.5) by going to OS admin >> software upgrade > tftp file management >> upload. 3 - go back do CUCM admin, into service parameters >> Cisco TFTP >> advanced and change "Enable Caching of Constant and Bin Files at Startup " to FALSE 4 - restart TFTP 5 - Restart the phones. 6 - check if the issue is fixed 7 - go back to the service parameters and change " Enable Caching of Constant and Bin Files at Startup " back to TRUE. 8 - restart TFTP service again all done! =) original bug on 3.x http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-communications-manager-callmanager/23560-ring-type-23560.html

Jose Ignacio Leite Neto · ‎09-25-2016

@ carlnewton You answer Should be marked as correct answer. After about a day troubleshooting with TAC i finally found this tread and bingo, i had the sip profile. changing the name as you advised made the trick. Migration: Be5K 8.6.1 >>> Import migration to CUCM VM 8.61 >>> refresh upgrade to 11.5 I was having the issue when upgrading to 11.5. i was sure that i made something wrong on the Import from BE5K, and that was causing the issue, but, the issue was like you described someone had the "Standard SIP Profile for Cisco VCS" configured in the CUCM before the upgrade. THANK YOU!

Jose Ignacio Leite Neto · ‎09-24-2016

try using a 8.6 OVA, this error usually is due to the virtual Network interface that was added to the VM. new ova comes with VMXNET3 where older OVAs (like for 8.6) used flexible type.

Jose Ignacio Leite Neto · ‎07-07-2016

Deepak, thank you! i will perform tests and once implemented i will advise!

Jose Ignacio Leite Neto · ‎07-07-2016

Deepak, thank you for the reply, i will make some tests and advise if this work fine! more likely i will need to do a overwrite of the CSS ready in place in order to get the new partition added to their list. do you happen to know if for some reason will it be required to apply the CSS to the phones or if will cause massive restarts / resets? after all i will change the CSS in place for all phones on this cluster.

Jose Ignacio Leite Neto · ‎07-07-2016

Hello folks, i have the same challenge! (add a partition to 220 CSSs). The link above for is broken (it was posted 5 years ago =]) Payal, may you re-post this document / link?

Jose Ignacio Leite Neto · ‎07-07-2016

Hi Chris, thank you for your comment, i understand the best practices. this client does not have unique DN numbers, they don't use +E164 and they don't want to revisit their dial plan. =( I'm stuck on either updating this manually or finding a way to bulk update it.

Jose Ignacio Leite Neto · ‎07-07-2016

Hello Folks! I'm adding a new office for a costumer into CUCM, this is a regular deployment with SIP gateways on site and a few phones, new CSS, partitions SRST reference, etc. The problem is that the client does not have a site-to-site partition, they actually list a internal partition into the internal CSS of all sites.. Meaning that my newly added internal partition for the new site (where the DNs will get created) will have to be added to 220 diferent CSS. So, Is there a way to add a partition to several CSSs by using CLI SQL queries or BAT?

Jose Ignacio Leite Neto · ‎06-22-2016

Vanderson, o maximum login time e' a duracao de tempo em que o usuario pode ficar logado, e nao necessariamente que todas as extensoes vao se deslogar ao mesmo tempo. exemplo com maximum login time de 8:00 horas: usuario1 se loga as 9:00 AM o sistema o desloga as 17:00 usuario2 se loga as 10:00 AM o sistema o desloga as 18:00 voce vai precisar : Enforce Intra-cluster Maximum Login Time = TRUE e manipular o tempo de login maximo intra cluster (extensoes / device profiles configuradas no proprio cluster) Intra-cluster Maximum Login Time = tempo de login maximo. esses parametros estao em service parameters / extension mobility e sao individuais por cada subscriber.

Jose Ignacio Leite Neto · ‎06-22-2016

4 years later i end up here and look who is around. lol

Jose Ignacio Leite Neto · ‎03-24-2014

May you share the sho run interface s of the router?

Jose Ignacio Leite Neto · ‎02-26-2013

yes, jaime is correct, also depends on the IOS version running on the H323 voice gateway. i was forced to dongrade a IOS version on a case where a fractional E1 was needed. Regards,

Jose Ignacio Leite Neto · ‎02-26-2013

Hi All, Is there a way to pull registration status for media resources from the CLI Sql query? i the goal here is to pull a list of the unregistered media resources. Let's say that a change will happen on the CUCM environment, by RMTM i can find the number of registered Xcode, MTP and CFB. However will give only the numbers, what i need is a list of the unregistered (or registered xcode, MTP and CFB) so i can compare before and after the change. i think if there is a SQL query that can pull the name and the resource and its status will do it, any ideas? Best regards,

Date Registered	‎11-30-2011 10:49 AM
Date Last Visited	‎11-08-2019 12:03 AM
Total Messages Posted	21
Total Helpful Votes Received	10

thanks for this!

this is a bug, which happens

This Should be marked as

try using a 8.6 OVA, this

Deepak,

Deepak,

Hello folks,

Hi Chris,

CUCM - Modify CSS via bat

Vanderson,

4 year later i end up here

May you share the sho run

Re: Fractional E1 - MGCP gateway

CUCM 7.1.5 - SQL Search - Media resourc...