I have a question:   Reviewing debug output i noticed this:               Oct 26 17:28:19 [IKEv1]: IP = 189.245.35.213, Trying to find group via OU... Oct 26 17:28:19 [IKEv1]: IP = 189.245.35.213, No Group found by matching OU(s) from ID payload: ou=ARI, Oct 26 17:28:19 [IKEv1]: IP = 189.245.35.213, Trying to find group via IKE ID... Oct 26 17:28:19 [IKEv1]: IP = 189.245.35.213, Trying to find group via IP ADDR... Oct 26 17:28:19 [IKEv1]: IP = 189.245.35.213, Trying to find group via default group... Oct 26 17:28:19 [IKEv1]: IP = 189.245.35.213, Connection landed on tunnel_group DefaultRAGroup       I guess after this, payload should be constructed according to the correct ou in Certicate (For ASA cn=IT & for user certificate cn=ARI). Could be this an issue to generate the followinf error in payload construction???       Oct 26 17:28:19 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 189.245.35.213, IKE SA MM:9bd156e4 terminating: flags 0x0301c002, refcnt 0, tuncnt 0 Oct 26 17:28:19 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 189.245.35.213, sending delete/delete with reason message Oct 26 17:28:19 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 189.245.35.213, constructing blank hash payload Oct 26 17:28:19 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 189.245.35.213, constructing IKE delete payload Oct 26 17:28:19 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 189.245.35.213, constructing qm hash payload Oct 26 17:28:19 [IKEv1]: IP = 189.245.35.213, IKE_DECODE SENDING Message (msgid=a9d5bd52) with payloads : HDR + HASH (8) + DELETE (12) + NONE (0) total length : 76 Oct 26 17:28:19 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 189.245.35.213, peer ID type 9 received (DER_ASN1_DN) Oct 26 17:28:19 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 189.245.35.213, constructing ID payload Oct 26 17:28:19 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 189.245.35.213, constructing cert payload Oct 26 17:28:19 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 189.245.35.213, constructing RSA signature Oct 26 17:28:19 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 189.245.35.213, Computing hash for ISAKMP Oct 26 17:28:19 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 189.245.35.213, constructing dpd vid payload   Oct 26 17:28:19 [IKEv1]: IP = 189.245.35.213, IKE_DECODE SENDING Message (msgid=0) with payloads : HDR + ID (5) + CERT (6) + SIG (9) + VENDOR (13) + UNKNOWN (239), *** ERROR *** total length : 1365   Oct 26 17:28:19 [IKEv1]: Group = DefaultRAGroup, IP = 189.245.35.213, Session is being torn down. Reason: Peer Reconnected Oct 26 17:28:19 [IKEv1]: Ignoring msg to mark SA with dsID 3481600 dead because SA deleted         I´m attaching the ASA´s config. Just for reference take a look at this:     dynamic-map=MODELOMVS crypto-map= MODELOCRY 92   Group-policy=DfltGrpPolicy Tunnel-group=DefaultRAGroup     VPN with dynamic-map&tunnel-group=modelovpn works fine, no issue   Regards and thanks for your soon response.           ... View more

I have an issue with the HR tool, graphs and charts are not displayed. In this case my scenario is: a)UCCX Premium Rel 7.0(1)_Build168 b)The HR tools was downloades from Tools->Pluggins (Rel  7.0 (1.16)) c)It was installed with a local admin rights d)Windows XP service pack 3 e)No previous Crystal Reports related software installed I found a bug related to sscsdk80.dll library but i didn´t find any other kind of solution. Anyone with similar issue??? Any help will be apreciated. ... View more