Switches and APs do not use the native VLAN for the management VLAN and the management VLAN can be any VLAN. In fact, it is not good design practice to have the management VLAN the same as the native VLAN. Also, I always recommend leaving the nativ...
You have stickiness configured but it has not been applied. Try this:policy-map type loadbalance first-match L7_VIP_LB_ORDER_POLICY class class-default sticky-serverfarm CarefirstNote the change in the last line. This applies the sticky rule. ...
The problem is probably related to the sheer number of adjacencies that EIGRP needs to maintain. When a PVC goes down EIGRP needs to drop the adjacency and then when the PVC comes back up it needs to rebuild the adjacency - while maintaining 214 oth...
Set the speed and duplex on the UNIX host and then on the switch set the speed and duplex and disable automdix.config tinterface g1/0/1 (or whatever interface it is)speed 100duplex fullno mdix autoswitchport hostexitexitwrite memMake sure the cable i...