We have 7K with M1/M2 Modules only connected to 5596UP switches.Does it make sense to create a policy type "Network-QoS" on 7K and 5k switches? or just create "QoS" (ingress) and "Queuing" policies?or it is  a good practice to follow MQC guideline an...

Cisco PI 1.3 How do you find device by MAC or IP address? I want find out on which device the end host is connected by entering MAC or IP address.I was able find the end host with LMS 3.2 Campus Manager->User Tracking->Report. My end device is Cisco ...

Site-to-Site tunnel not coming between ASA 5520 and ASA 5505. Both has 8.0(5). Following is the config for HQ and Remote Site.HQname 172.16.4.0 Homeless!interface GigabitEthernet0/0 nameif outside security-level 0 ip address xx.xx.xx.xx 255.255.255.0...

I have a two fiber connection from our Central Office(6513) to Remote office (6509). I have a requirement that on the remote office if one of the fiber goes down, the second fiber should work as a failover. I am planning to use SUP720-3B SFP to conne...