About juanchop246

juanchop246 · 05-21-2018

Hi Everyone I got an error trying to establish a pppoe session to a BNG ASR9000, in the debug it seems that que client pppoe its sending a pppoe packet type 11a7 (PADT) to the BNG, just after the client receives a pppoe packet type 1165 (PADS). I j...

juanchop246 · 05-18-2018

Hi Anyone knows why after the license location command, the license seems still non operational??? (admin)#sh run license A9K-2T-TR-LIC type permanent location 0/0/CPU0 (admin)#show license FeatureID: A9K-2T-TR-LIC (Slot based, Permanent) To...

juanchop246 · 05-26-2014

HiIt is possible to have múltiples VEMs in a single ESX Host (Vmware 5.5)?? And Each VEM attached to a different VSM?? Thanks in advance

juanchop246 · 02-14-2014

HiI am trying to connect VSM hosted in a Nexus 1010 appliance to mi vCenter, trying to connect them trough the java gui installer (vCenter Server Connection option), but in the last step i get an error saying "timeout reached. Something went wrong....

juanchop246 · 10-29-2013

HiAnyone knows if it is possible to integrate non-Cisco Devices with HWTACACS with a Cisco ACS Platform?Is there any limitations or issues?Thanks in advance.

juanchop246 · 06-19-2018

Hi, Xander. I want to thank you for the info about ASR9k and IOS XR! a really Lifesaver! But I am already in a issue...I am migrating subscribers PPPoE from ASR1001 IOS-XE to ASR9006 BNG (IOS-XR 6.1.4), but recently we notice this events, and the s...

juanchop246 · 05-21-2018

Hello! Thanks Niko It Works! Did you know if the procedure to license A9K-BNG-LIC-8K would be the same?, but the location command will be pointed to the LC, RSP0 and RSP1, and then all subslot should be reloaded? Thanks in advance. Regards.

juanchop246 · 10-24-2013

Hi MarcinThanks for you reply.Actually the non IOS Client (Huawei) is trying to enroll to the url http://ip.address:80 and also http://ip.address but his debug says "invalid url" in both cases. Do you know successful deployments between Cisco IOS CA ...

juanchop246 · 03-03-2013

The disruptive time was 30-50 seconds while the fex get offline and the begin with the online sequence.Thx Jerrry.

juanchop246 · 01-27-2013

Hi ScottBut it is normal that a client associated with a AP in the fifth floor moves to the second floor and maintain this association, even if the SNR its low compare with the Second Floor AP?The wierd thing is that when we disable/Enable the wirele...

Member Since	‎01-25-2013 09:03 AM
Date Last Visited	‎02-14-2021 03:48 PM
Posts	13

User Statistics

User Activity

ASR9000-BNG Sessions PPPoE does not work - Client Sending PADT

IOS-XR License activate fail

Multiple VEMs in the same ESX Host???

Issues connecting VSM in Nexus 1010 to vCenter

HWTACACS integration with ACS Cisco

Re: ASR9000 BNG debugging PPPoE sessions

Re: IOS-XR License activate fail

SCEP Enrollment failure IOS CA Server

FEX Straight Thru to FEX vPC Migration is Disruptive?

Wrong AP Association