one of access points has become faulty.It is air-lap113ag-e-k9The system does not have MAC address yetThe following commands will set MAC address,parameters used by TFTP operation, and finishloading the operating system software: set MAC_ADDR s...
Hi:I bought Cisco AIR-WLC4402-12-K9 with 2 x sfp transceivers 3CSFP93-4500And WS-C3560-24PS-SMy Question is which module or modules will i need to connect them up.Regards,Nabil
Hi I has setup vpn site to site. local network with 192.168.48.0 and public address on 877w... the other site has netgear fs338. local network is 192.168.100.0 and public address. My problem is i got 877w ON LINE. and can ping the other end pu...
Hi. I am new to my network...my manager want to get firewall .. Pix or Asa.. for HQ.. and have vpn setup with others remote sites.... The remotes sites all have statics public address... connected with adsl netgear routers... he is saying that we don...
HI Scott;Thanks for you support.This is the first thing i seeXmodem file system is available.flashfs[0]: 48 files, 14 directoriesflashfs[0]: 0 orphaned files, 0 orphaned directoriesflashfs[0]: Total bytes: 15998976flashfs[0]: Bytes used: 12607488flas...
Thanks.. this is the output ..of those two commandsRouter#sh cry isa saIPv4 Crypto ISAKMP SAdst src state conn-id slot status195.72.33.5 195.72.45.211 QM_IDLE 2008 0 ACTIVEIPv6 Crypto ISAKMP SA=====...
