About RichardAtkin

RichardAtkin · 01-26-2024

https://developer.cisco.com/docs/support-apis/#!product-information/get-product-information-by-serial-numbers I have a whooole bunch of serial numbers that I'm looking up against this API. This all works great, until I feed it the Serial Number from...

RichardAtkin · 01-26-2024

I recently had need of pulling out information about all the FTDs from multiple FMCs within a RADKit deployment. I haven't really done much with FMC before, but I was surprised at how easy it was... Here's my quick solution. The only real assumpti...

RichardAtkin · 04-26-2023

You've heard about Cisco RADKit and want to get started with scripting things yourself. Maybe you're struggling to get started? Here's a little example code that introduces some key concepts to get you going. In this example we will; Authenticate to ...

RichardAtkin · 10-04-2022

SUMMARY The software suggestion API returns wrong data for some models of 5508 Wireless LAN Controller. ISSUE When using this API endpoint: https://api.cisco.com/software/suggestion/v2/suggestions/releases/productIds/ The API responds with wrong data...

RichardAtkin · 08-04-2020

Hi, I'm running ISE 2.7 Patch 2 and I understand this is a known bug with several support cases raised against it. It seems many have the issue via some DUO-related config, but in my case it's for eduroam, however the gist is the same - ISE is failin...

RichardAtkin · 10-05-2022

Cheers - I sent an email to that alias about this last week, but nobody has acknowledged it I'm afraid.

RichardAtkin · 12-17-2019

Found this:https://www.ciscolive.com/c/dam/r/ciscolive/apjc/docs/2018/pdf/BRKRST-2673.pdf About halfway down (sorry, no page numbers) it gives a nice simple example of how to use a VirtualPortGroup to provide connectivity between the network and the ...

RichardAtkin · 12-17-2019

Hi Dude,Yes, this is all on a single (not even stacked) switch and all in the same subnet. I’m fine with ‘normal’ networking, but both Docker and IOX are new to me. I’m assuming human error on my part, I just don’t know enough to fix it! cheers,Rich

RichardAtkin · 10-24-2019

Thanks for the suggestion, but error handling with an ‘automated SSH’ approach like that is difficult. I also have hundreds of interfaces that I need to bounce and this approach would take quite some time to execute... I’m really looking for a more p...

RichardAtkin · 10-24-2019

I got a fix for this in the end - the connector requires the VLE URL to use HTTPS and I was only using HTTP.

Member Since	‎08-01-2017 06:05 AM
Date Last Visited
Posts	255
Total Helpful Votes Received	161

User Statistics

User Activity

Support API vs C9500-32C-A

RADKit and FMC

Getting started with Cisco RADKit Scripting

Software Suggestion API returns incorrect data

ISE - CSCvu67106 - 11351 Failed to read RADIUS server sequence configuration

Re: Software Suggestion API returns incorrect data

Re: IOX Docker Networking - Half works?

Re: IOX Docker Networking - Half works?

Re: Programmatic way to Shut/No Shut Interface?

Re: Cisco Webex Education Connector - LMS integration (updated Oct2019)