Hello Support Community
Hope you are able to shed some light on my question.
Below output showing CEF entry for the destination 10.255.225.26 and per-destination CEF load balancing algorithm is enabled.
pe02#sh ip cef 10.255.225.26 detail
10.255....
guess you are reading a bit out of context here regardless 'title of the thread':I responded to the statement "I am hard-pressed to find a use case for SVL in a strict Layer 3 environment"HTH
Hey Jonathan
@Jonathan Cuthbert wrote:
@leandrordc wrote:
To do LAN Automation of Stackwise Virtual switches, you can run the LAN Automation to provision the Master Switch then configure manually the stackwise on Master and Standby using a script lik...
Hello Bruno Gibraltar-16.11.1 software release does support SVL on supported network modules (C9500-NM-8X and C9500-NM-2Q) forC9500-40X and C9500-16X models. see below link to release notes:https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9...
Thanks Naotaka. However, in my case the below has worked for me. Procedure: First please download a valid IXM image:https://software.cisco.com/download/home/286311296/type/286311234/release/2.0.32 Untar the file and get 'recovery.itb' & 'release.it...