Hey Glenn,Please see the following link below. It doesn't talk to how many T1s are supported it mainly pertains to how many sessions Unity or Unity Connection supports with the TIMG. Unity supports up to 200 and Unity Connection supports up to 144....
CER can only report information populated on it's switch port, IP subnet, or ERL ALI location field. In order to capture something to this effect you have to configure your zones (ERLs) to the user's cubicle or office. I don't recommend this design...
Hi Andrew,I have a couple questions. Is CDP enabled on the switchport the phone is connected to? If CDP is enabled do a "show cdp nei <*switchport*> detail just to confirm you see the phone's MAC address. Lastly, have you tried replacing the phone...
"When Cisco ER gets an emergency call from an ERL, it calls the onsite alert number of the contact for the ERL and plays a pre-recorded message that includes the phone number from which the emergency call was placed."http://www.cisco.com/en/US/partne...
You can develop a standard naming convention for your ERLs. There's no specific best practice for naming conventions. Here's what I use and it's generic enough to add a function if needed.<*Site*>_<*Floor*><*Area*>-<*function*>_ERLEx. You have a si...
