I have setup the Anyconnect client for our wireless network. Most of the employees would also use the Anyconnect client for home or travel use as well. I would have a different profile for that connection since the VPN IP address would be different: 10.x.x.x Inside Wireless (no internal network traffic allowed without VPN) 60.x.x.x Public IP on the ASA 5515x for VPN connectivity I am looking for a way for the client to choose the appropriate VPN profile by the ip address and network that the user is part of currently. I have looked at the autoconnect feature, but I have to do that by DNS name or ip for trusted versus untrusted. Unfortunately the DNS name/ip that we use on the wireless is openDNS. So if anyone at home used that same DNS then the profile would try to connect to the wireless side for the VPN. Any help would be appreciated, thanks! ASA 5515x 8.6(1)2 AnyConnect 2.5.2
... View more
Here is some more info, MTU size seems to be fine (1426 bytes) and on a ping test the latency is around 52ms but the tracert shows that it takes 14 hops (with latency from 16ms to 86ms) to get from the 5510 location to the public interface of the 5555. All of my other locations only take anywhere from 5 - 6 hops. So once again I am leaning toward the amount of hops causing an issue. Especially since they are moving a large amount of files, less files with large data size. If anyone else has any ideas, please let me know, and thanks for any and all help!
... View more