About Nickolus Looper

Nickolus Looper · 04-12-2019

Hi All - I'd like to propose the creation of Visio stencils for the 3802E access point.Obviously very similar to the existing 3802I stencils, but with the addition of the antenna connectors. ThanksNick

Nickolus Looper · 10-10-2017

Hello - Does anyone know how to find out the port-to-ASIC mapping on the 3850X series switches? On some platforms, 'show interface capabilities' yields this info...on others, 'show platform pm if-numbers' can give a clue. I'm having no luck fig...

Nickolus Looper · 06-10-2016

I realize that in many shops, the network folks don't have much visibility into the administration of the PI VM utilization, but for those who do... Published specs aside, what sort of disk I/O / CPU / memory utilization do you see in real life? The ...

Nickolus Looper · 09-18-2015

Hi All -Do folks regularly take the step to manually 'Refresh Config From Controller' when faced with an audit status mismatch in Prime Infrastructure? I know it's also possible to drill down into the audit status report to figure out what's causing...

Nickolus Looper · 12-30-2014

Hi All -At my company, we're doing everything we can to improve PI performance, but it's still god-awful slow.- 24 GB RAM- 16 vCPUs- Moved it to its own ESXi host Has anyone heard of taking the ISO and installing PI on your own bare-metal server with...

Nickolus Looper · 10-16-2020

I'm also searching for the 9800-L stencils - specifically the 9800-L-F.

Nickolus Looper · 04-01-2020

How do we view or search the raw syslog data?

Nickolus Looper · 01-21-2020

Hey All - I found a pattern as to which Axiom & FS - Fiber Store SFPs will work on the 5520 WLC. According to the output of the command 'debug fastpath cfgtool --dump.sfp', these SFPs work:1 FiberStore (0x20)10G BASE-LRM SFP-10GLR-31 ...

Nickolus Looper · 12-25-2019

I replied too soon - the command: clear capwap ap all-config Fixed the issue for me. Thanks!

Nickolus Looper · 12-25-2019

I need to make my alerts more prominent in these forums, as I'm not noticing the replies - sorry.I have run this one or two more times since the post, and yes, it always end up taking a lot longer than the documentation shows - like several hours. T...

Member Since	‎10-19-2011 06:42 PM
Date Last Visited	‎01-28-2022 01:48 PM
Posts	50
Total Helpful Votes Received	27

User Statistics

User Activity

AP 3802E Visio Stencils

3850 Switch Port-to-ASIC Mapping

Network Peeps Who Also Touch vCenter - Prime Infrastructure VM Disk I/O, Other Utilization

Prime Infrastructure & Audit Status Mismatches

Prime Infrastructure 2.x - Possible to Install On Own Hardware NOT as a VM?

Re: Need Visio Stencil for C9800-L

Re: Assurance Feeds from Endpoints to DNAC, how?

Re: 10Gig Ports not coming UP on WLC 5520

Re: 2702i not joining 9800-CL

Re: Hi Did you tweak all