Hello ExpertsI need great help from all of you , i have MPLS network and running multicast . we have a new integration with Cisco IPTV , scinario will be the headend will convert the signal into Channels multicast IPs over MPLS. We have SSM multicast...
Hello expertsi have a big customer who have (one pub and one sub) one unity conn and one CUP , all version are v8.6 . All systems are working so well. The customer asked us for a cluster for 10,000 phones , so our presales team helped him for a solu...
i have two problems i have cucm v7 and gateway which connected to E1 , outgoing all are ok.Incoming calls are hit the gateway but i get an errir in debug isdn q931 unallocated unassigned number , i am sure of my configuration. Please help , i shared ...
i have a gatekeeper integrte with cucm v7 and i have two gateways .All configuration are ok and cucm & gateways are registered to gatekeeper ,my problem when i dial a number from ip phone which on cucm do not hit ip phone on of other branch ...
hello sirmy issue , regarding multicast not DMP.i need to know the required configuration for channel group join. I can explain more , i will have 200 channels and each channel will have multicast IP. My issue how can i configure for each channel a g...
Thank you mr/amjad for your help . i need your help please , i need to know how can channed like CNN withmulticast IP 239.10.2.1 will read to Cisco DMP successfully. I need some helpful commands for that , and i will complete the rest.Thank you
thanks bilal , i have my own mpls network. We also use SSM multicast . I need to usderstand what are the required configuration for routers , switches to push the traffic , join and leave traffic.thanks
