I have a config question that I'm not sure how to approach. Our user network is made up of 3 subnets behind a 3750, the 3750 connects to 2 routers and then FW for 2 individual Internet connections. The 3750 has a default gateway configured to use Int...
Our enviornment includes 3560 switches and 2800 routers. We have a few remote offices using an application on TCP port 1677 that use far to much bandwidth. Our WAN provider can throttle and police this for us, if I can TAG this traffic, for example...
I'm in need a bit of clarification please. We have several branch locations with MGCP gateways, with MoH files loaded on them. These are custom files for each location and play when calls come in to these Gateways from the outside. Question one is if...
We have a single install of Attendant Console that will not display the status/ first column of the Directory window correctly. Instead of a phone or forward on on call status it shows a question mark. Any idea how I might correct this.
We have a 3750 at the center of one of our offices. This office has two internet connections, and applications that we want to use the seperate Internet connections, but not both. Currently we have an ip route statement on the 3750 sending Internet t...
The phone MACs are in the CUCM AC application user, although I do not understand what you mean by sync in this regard.The user is in the CTI Control Enabled group.Thanks,Andy
It is a typical MPLS WAN. I think RSPAN will do what we need, which is capture the traffic from a voice VLAN on a switch in one location with a capture device in another.
