About mail2rravikumar

mail2rravikumar · 04-13-2005

Dear all, I would appreciate if any one could help me in configuring ISDN. We are trying to configure ISDN for one our clients. They have PRI at both the ends and they also have frame relay link between two routers. The idea is they have many subi...

mail2rravikumar · 09-27-2013

I believe switchport nonegotiate <<<<<<<<< This will disable DTP you should try to remove this on both physical port and the portchannelThis should fix the issue

mail2rravikumar · 08-09-2006

Dear Devang, It seems that you have missed the reverse routes on the router so that router knows that 10.147.24.0 /24 (vlan3) subnet can be reached through vlan 10 (10.147.8.2). Just add a route as ip route 10.147.24.0 255.255.255.0 10.147.8.2This...

mail2rravikumar · 04-16-2005

Dear Pushkar, I am extermely sorry for the delayed response as I was busy on calls. I checked the link but I am afraid if the link helps.Let me explain the issue again:Say for . eg: ihave pri at both A and B end. I have four dialers configured o...

Member Since	‎04-13-2005 05:10 AM
Date Last Visited	‎01-07-2020 07:46 AM
Posts	4

User Statistics

User Activity

ISDN Configuration

%EC-SP-5-CANNOT_BUNDLE2 - Switch incorrectly sees port in Dynami

Re: router on vlan problem

Re: ISDN Configuration