About Gonuguntla Gopi

Gonuguntla Gopi · 07-10-2017

Dear Friends, One of my customer has C240M3S server with SAS LSI 2008i RAID controller & A03-D600GA2 HDD . Right now customer want to upgrade the server with additional drives of "A03-D600GA2 " . Unfortunately cisco announced these drives as EOL d...

Gonuguntla Gopi · 05-09-2017

Dear Friends, I am trying to install the esxi on cisco UCS C240M4 server as standalone. It has 2x Nvme drives & rest all are SAS drives. But i am not successful. This device has UCSC-MRAID12G controller too. But it won't support Nvme drives. Please...

Gonuguntla Gopi · 03-27-2017

Dear Friends, Although i read the documents why cris-cross is not supported, But still not convinced. I have attached the sample architecture with 2 vsan's 20,21 in each FI & MDS . 2 Port channels for one for each vsan in each FI. 2 Port channels ...

Gonuguntla Gopi · 02-20-2017

Dear Friends, There are total 8 servers configured with same SP template...& Windows 2012 is being installed. Out of which 5 servers vfc interfaces are showing the below error: FI-EXCHG-A(nxos)# show int vfc 963vfc963 is down (Error Disabled - VLAN L...

Gonuguntla Gopi · 12-20-2016

Dear Friends, I have 7 blades B 200 M3 with VIC 1240. Now we are planning for a new infra with FI 6332-16UP,2304 IOM's & Few M4 blades. gone through few documents & there are few says M3 blades with VIC 1240 supports FI 6332-16UP,2304 IOM's and few ...

Gonuguntla Gopi · 07-11-2017

Dear Krik, Thanks for the valuable information We are having C240M3 . Regards, Gopi G

Gonuguntla Gopi · 03-28-2017

Walter, Let me re-phrase.Even if i do as said above. Still the infra will be down, post configuring multipath also. Kindly find the architecture enclosed. Because of this i was telling that infrastructure will be down if we cannot have 4 MDS switche...

Gonuguntla Gopi · 03-28-2017

Dear Walter, Thanks alot for the info.I agree with your answer. Although it contradicts. But, assume if the FI-A which is on left & SAN Switch-B which is on right is faulty or failed, then the entire infra will be down. What is the best possible d...

Gonuguntla Gopi · 03-27-2017

It's connectivity issue to the uplink LAN & SAN Switches. I have asked ground team to do the proper connectivity. Post that issue got solved.

Gonuguntla Gopi · 02-20-2017

Wesley, Did all the options available..But the luck is not in my favour. Did resetting of DCE.vHBA etc.. Any other options.. ?

Member Since	‎05-21-2012 02:32 AM
Date Last Visited	‎02-16-2021 10:36 PM
Posts	37

User Statistics

User Activity

SAS LSI 2008i RAID controller compatibility with UCS-HD600G10K12G

ESXi 6.0 Installation on Nvme Drives ( With RAID/Redundancy/ mirroring)which comes with cisco C240 M4 Server

Why Cris-Cross between MDS & FI is not supported ?

on VIF paths of vfc's(Error Disabled - VLAN L2 down on Eth interface)

B200 M3 with VIC 1240 supports ( 6332-16 UP FI with 2304 IOM)

Dear Krik,

Walter,

Dear Walter,

It's connectivity issue to

Wesley,