About PK IT

PK IT · 09-21-2015

This is sort of a multi-layered issue: I am trying to switch from VPN IP Pools on my ASA 5512x (9.4.1) to my two internal Windows DHCP/DNS servers for IP addressing.I am running into a problem with my DHCP profiles where Anyconnect Client (3.1.10010...

PK IT · 05-03-2013

I'm porting our configuration from a Pix 515 firewall to an ASA 5512x. What's vexing me right now is with the deprication of the "static" command, I can't quite figure out the best way to Identity NAT my inside subnets (multiple) to the DMZ subnetSo...

PK IT · 01-07-2016

I was having this problem too, and rolling back to ASDM 7.51-112 also worked for me

PK IT · 05-03-2013

OK, I had a major problem but now I think I might have just answered it myself, but confirmation would be helpful.So on the PIX 515e 6.3(3) firewall, allowing an outside connection into the network looked something like this:Let's say I have a mail s...

PK IT · 05-03-2013

Thanks for the tips Jouni. I may play around with them and see if they are unneccessary, we have several DMZ webservers that are managed by internal systems as well as accessed by both internal and external clients. I am pretty sure we used Identit...

PK IT · 05-03-2013

Thanks for the quick response Varun! So just to confirm - I am using the right stand-alone (not tied to any object) nat command to implement my Identity NAT rule using an object group?

Member Since	‎05-03-2013 01:30 PM
Date Last Visited	‎05-02-2018 12:45 AM
Posts	6

User Statistics

User Activity

VPN IP Pools vs Windows DHCP Server

Best way to setup identity NAT on ASA 5512.x (CLI 9.1)

I was having this problem too

Re: Best way to setup identity NAT on ASA 5512.x (CLI 9.1)

Best way to setup identity NAT on ASA 5512.x (CLI 9.1)

Best way to setup identity NAT on ASA 5512.x (CLI 9.1)