About tf4string

tf4string · 05-26-2014

Hello,I apologize for the vague title. I am trying to convert my production network from Transparent to Client. All my attempts is giving me problems.I have two C4510R+E core switches which are my VTP Servers, then mostly 2960 Edge switches, with a f...

tf4string · 08-27-2014

Hello, I understand this is a very old post but I was hoping someone could advise on the same issue I am having. I run a snmp tester on my server and it cannot reach my switch, although they can both ping each other. There is NO router separating th...

tf4string · 05-27-2014

Hello,Unfortunately we have no Syslog setup on any server. It is on my to-do list.You may be right. I was able to turn one 260 switch into client mode but because it uplinks to my trouble 3550 I guess is why the vlans didn't propagate? Although it sh...

tf4string · 05-27-2014

Hello,The 2960s currently have around 25 vlans each. I did the command No VTP Password on both server and client, it says no password set. But when I change from transparent to client the change doesn't stick. This happens to another of my switches a...

tf4string · 05-05-2013

Thank you both. Yes this command does work. I did a reload and the config did stick this time. I am surprised that the old command works and not the new one. Also I don't like this command because it doesn't tell you how many bytes were copied like t...

tf4string · 05-04-2013

Hello.I know this post is old but I am having this problem too. Although for me it tells me that OK for the build. But it always says 0 bytes. Any ideas? I am running new 2960-S switches and none of them can copy the configs. This is my sh ver:MOH-29...

Member Since	‎05-04-2013 03:23 PM
Date Last Visited	‎08-18-2017 04:00 AM
Posts	6

User Statistics

User Activity

VTP not working

Hello, I understand this is

Hello,Unfortunately we have

Hello,The 2960s currently

Startup-config isnot copying to Running Config

Startup-config isnot copying to Running Config