Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,I have configured ASA 5520 for 3 Networks & one ISP.1> Official proxy 172.16.1.0/242> Guest ( SSID) on controller network Office Area 10.156.250.0/243> GueSt ( SSID) on controller Network Accomodation Area.10.156.249.0/24From accomodati...
Helloo Guys, I want to configure cisco router 3645 for dual provider,1> Router is configured on Lease Line for Intranet ( Internal application access ) and internet both from HQ.Now we are going to hire ISP line locally from local ISP for internet us...
Hello Guys,Below is the snap shot for my 6500 switch modules which is showing that WS-SVC-IDSM-2 card on slot 7 and WS-SVC-WISM-1-K9 card on slot 9 is down and status is not ok,Pls. suggest so can be made UP & Functioning.SW6500#sh module Mod Ports C...
Hello Guys,My wireless network was very good before putting Cisco WLC 4402 with version 3.2.171.6.In my network there are two SSID's one for official and another for guest, which is working one single LAP 1142.( Total 12 LWAP is here) we decided t...
Hello Guys,Good Morning,I have 3 mb bandwidth from ISP, and i want to dedicate 1 Mb to guest wireless user rest for internal wireless user on ASA any suggestion...?pls. suggest from below configuration...if it's ok.access-list PoliceACLname permit ip...
Yes guest user x.x.25.0 directly connected to internal1 and gueSt x.x.249.0 user connected through internal1 from core switch through router map.Core SW Config......access-list 49 permit 10.156.249.0 0.0.0.255route-map 49 permit 20 match ip address ...
Hi Bro,Same switch with same IOS was working earlier, after reboot this is not working .ASW01-MHQ#sh power system power redundancy mode = redundantsystem power total = 2771.16 Watts (65.98 Amps @ 42V)system power used = 1385.16 Watts (32.98...
