hi
i have been trying to use port forwarding on an adsl router with ISP assigned public IP address on the dialer0 interface. i also have an ASA 5506-X behind the ADSL Router with a /30 public IP address.
i have the ASA working fine using ip nat insid...
Hii am trying to assign a right role for a user who authenticates to nexus 7k switch via radius. i am using cisco ISE version 1.1.1.268 and the nexus version is 5.0.2I have created a role on nexus role name network-XXX rule 2 permit read rule 1 ...
HII have come across an issue in ISE1.1.2. once i create a guest account, and click on email, i get the below errori have patched version 1.1.2 to the latest patch 3i have also configured teh sponsor portal customisation email address. ISE...
HI, I am having difficulty in setting up the ISE to allow password change when a user logs onto a switch/router when their password is expired. Users dont get prompted to change the password when logging onto the switch with AD credentials.i have che...
hiI keep getting error meesages on the ISE in regards to RADIUSthe error is Dynamic Authorization failed : 1213 No response received from Network Access Device i am using ISE version 1.1.1 and the NAD is a WLC running version 7.0.98....
issue fixed from the below document
http://www.cisco.com/c/en/us/support/docs/security/adaptive-security-device-manager/118842-technote-asdm-00.html
thanks for all your help
the anyconnect still doesnt work.
i used an iphone hotspot SSID to ping and to ssh to the outside ASA interface, i could see that the ssh was blocked from the real time logs but i dont see any https traffic coming in.
hi phillip
the inside interface of the ASA is a different subnet.
i have 1.1.1.1 as the outside interface of the ASA. 2.2.2.2 is the adsl router infront of the asa
i cant browse to https://1.1.1.1 and webvpn is enabled.
i suspect its port forwarding...
i have followed the doc to the dot. the only other theing i can think of is that i hav got profiling on.CoA is set to re-authi pass mab, get to the guest portal, log in using guest credentials, but then i dont get a new IP in the guest vlan. my ip a...
