We are currently running the Wireless Control System (WCS )on Windows 2003 Server. We would link upgrade the Server OS to a newer version Win 2012. Kindly, advice if it is supported or no .if yes , what is the procedures for upgrading .regards ,
We have WAN router 2921 with ios version c2900-universalk9-mz.SPA.150-1.M4.bin We conduct penetration testing for Network security and found many vulnerabilities in the router as per attached .Is there any way to solve and fix theses vulnerabi...
we have cisco WLC model 2504 with vesion 7.3 and LWAP model AIR-CAP2602I-E-K9 some users who have laptop model Lenovo E420 can connect with cisco AP (AIR-CAP2602I-E-K9 ) but can not access to internet . but all other users have other l...
We have two WLC model 5508 with the follwing information Manufacturer's Name.............................. Cisco Systems Inc.Product Name..................................... Cisco ControllerProduct Version.................................. 7.0.116.0...
we have two N7k with vesion 6.1(2) and stack 2960 switches in the floors .each switch 2960 connected to N7K using VPC link.yesterday , we recevied many critical message from N7k as the following.3/5/2013 8:56:30AM 10.1.1.2 Critical : UTC: Inserted d...
Dear leolaohoo ,My question is clear, can we configuring mobility group between two controller 2100 and 2500 to support mobility?also we entered the link you mentioned above but we did not found version 7.0.235.3Regards ,
i configure and enable PIM on the interfeace VLAN but do not work properly.also we need the configuration requied to applied in the two cores (N7K) to work as multicast redandancy using MSDP with auto RP technology .regards ,
Crash ip meaning ( the IP was used by AP appears as crash IP in the DHCP when the APs power off and power on )This affects the number of IP reservated for AP scope in the DHCP server .when all AP is power off and power on , some access points is not...
