About jriacono5

jriacono5 · 11-23-2019

Please do not say it should be blank. That does not work. I need to get into admin advanced but cannot figure out what the password is supposed to be.

jriacono5 · 10-28-2019

Hello,We are setting up a new customer that requires many simultaneous adhoc conferences. We are looking at an ISR 4000 router that can handle the SM-X-PVDM-500. All calls will be using the G.729 codec. In the datasheet for the SM-X-PVDM-500, it says...

jriacono5 · 10-17-2019

Hello,I am working with a client that do a lot of transfers using adhoc conferencing. They will be using G729 for their codec for all calls. The call center agent will receive a call, set up an adhoc conference with another user, and then drop off th...

jriacono5 · 09-20-2019

Hello, We are planning a new deployment for a client with multiple forests and domains. I know that you can use LDS to combine the directories and allow users to login. If we were to implement SSO and the IdP was able to authenticate users in each do...

jriacono5 · 05-29-2019

Hello,I am working on my first deployment for Cisco Webex Calling. We have a number of 8851 phones we will be registering to the cloud. I have seen how to configure them in the Webex Control Hub, but I am a bit unsure about the best way to configure ...

jriacono5 · 03-25-2020

Thanks

jriacono5 · 03-25-2020

Ok... How do you do that? Wouldn't that file be encrypted since it has passwords in it?

jriacono5 · 03-25-2020

Ok.... I am the Webex Calling Admin. Where in the admin interface does the password get set?

jriacono5 · 03-24-2020

I couldn't find it either... I wrote in my notes that it was admin/admin but I don't think that is right. I was able to circumvent the issue I needed to access the admin page for a different way. I was trying to do an Ent2MPP conversion and I realize...

jriacono5 · 06-25-2019

Thank you for the reply. I was able to get the phone registered but I needed to update the Profile Rule tohttp://18.222.93.124/Cisco/$PN/$MA.cfg This allowed the phone to upgrade the configuration and then register. I think that it was on very old fi...

Member Since	‎11-21-2008 06:56 PM
Date Last Visited	‎02-14-2024 12:05 AM
Posts	46

User Statistics

User Activity

Admin Password for 3PCC/MPP Firmware Phones AFTER it registers to Webex Calling

Codec Question about SM-X-PVDM-500

Conferencing Resource Question

Jabber with Multi-Forest/Domain and SSO

Registering Cisco 8800 Phones to Webex Calling (Broadcloud)

Re: Admin Password for 3PCC/MPP Firmware Phones AFTER it registers to Webex Calling

Re: Admin Password for 3PCC/MPP Firmware Phones AFTER it registers to Webex Calling

Re: Admin Password for 3PCC/MPP Firmware Phones AFTER it registers to Webex Calling

Re: Admin Password for 3PCC/MPP Firmware Phones AFTER it registers to Webex Calling

Re: Registering Cisco 8800 Phones to Webex Calling (Broadcloud)