About paul.3.robertson

paul.3.robertson · 09-19-2013

Folks,I think PSU2 has failed:atl01-ucsf01a-A /server # show psu detailPSU: PSU: 1 Overall Status: Operable Operability: Operable Threshold Status: OK Power State: On Presence: Equipped Thermal Status: OK Voltage Status: OK ...

paul.3.robertson · 08-29-2013

Servers within our existing v2.0(3c) UCS pod need new connectivity to a layer 2 network in our datacenter. This network is not accessible to the Juniper switches northbound of our current 6248 fabric interconnects. After reading the docs, it appears...

paul.3.robertson · 05-07-2013

Folks,We're planning to relocate about a dozen UCS rackmount servers and the two top-of-rack C2232 FEXes to an adjacent rack. No changes to the C6248 Fabric interconnects. The plan is to power down all the gear in the old rack, rerack it in the new ...

paul.3.robertson · 11-08-2012

I have a C210 M2 server that is failing with an apparent (?) hardware issue. From the UCS cli, I see the following:# show fsm statusID: 11Server: sys/rack-unit-11 FSM 1: Remote Result: Service Unavailable Remote Error Code: 4106 ...

paul.3.robertson · 10-23-2012

We recently enabled smtp callhome for our ucs pod a few days ago. Since then, we've received more than a dozen email bursts about power supply failures in each of the four Cisco Nexus 2232TP FEXs in our pod. In each case, we get a "Recovered" email w...

paul.3.robertson · 09-30-2013

Opened case with TAC, and replacing the power supply resolved the issue.

paul.3.robertson · 09-21-2013

Padma,This is the only server with the above behavior. I've power cycled the server, and also reacknowledged it, but the PSU remains in the same state.Cheers,Paul

paul.3.robertson · 09-19-2013

Hello,It is indeed a UCSM managed C210 M2:atl01-ucsf01a-A /server # show inventoryServer 11: Name: ATL-L09-U24 Acknowledged Serial (SN): QCI1543AD3U Acknowledged Product Name: Cisco UCS C210 M2 Acknowledged PID: R210-2121605W Acknowled...

paul.3.robertson · 09-16-2013

We imlemented disjoint L2 networks today, and there was no noticeable impact associated with the change. From what I could observe via multiple ping sessions, not a single packet was dropped.Robert's suggestion to err on the side of caution and sched...

paul.3.robertson · 08-30-2013

Robert,Ouch! I was hoping to avoid any impact at all to existing UCS hosts. :-(Currently, all northbound traffic flows via a single port-channel on each fabric. If my first step in creating disjoint L2 networks is to configure VLAN manager to associa...

Member Since	‎10-15-2012 10:35 AM
Date Last Visited	‎08-18-2017 04:00 AM
Posts	19
Total Helpful Votes Received	5

User Statistics

User Activity

Is this a failed power supply?

Impact of enabling UCS L2 disjoint networks for existing pod

Rack relocation of rackmount servers and FEXes

C210 M2 server failure: "Invalid HBA for Cisco VIC adapter"

Odd power supply fault callhome emails on Cisco 2232 FEXs?

Is this a failed power supply?

Is this a failed power supply?

Is this a failed power supply?

Impact of enabling UCS L2 disjoint networks for existing pod

Impact of enabling UCS L2 disjoint networks for existing pod