Hello,I am having troubles to configure PRIVATE VLANs on Cisco ME 4900. The scenario is as follows:We need to connect several DSLAMs on the 4900 switch, every DSLAM has 4 VLANs configured (VOIP service, MGMT, ADSL Private, ADSL Public), and sends the...
Dear friends,I installed UCCX 8.5(1)SU1 and now I am trying to install the CAD software on Agent PCs. I go to CCX Administration -> Tools -> Plugins and download the Cisco Agent Desktop software. However after the installation it displays this odd me...
Dear friends,We are trying to upgrade a cluster of two CUCM 6.0.1(1b) servers, to CUCM 8.6(1a). These new servers will run on vmware esx which will be installed on Cisco UCS Server. We are stuck on the restore phase. The procedure will have the follo...
Hello everyone,I am trying to configure some digit manipulation for outgoing calls on Cisco CME 8.1.The goal to accomplish is this:translate the called number (DNIS) from 06........ to 3556........translate the calling number (ANI) from 1.. to 35544...
Hello everyone,I am having an issue with an H323 trunk between Cisco CME 8.1 (running on 2911) and a VoIP Service Provider.The problem is that when i recieve calls from this trunk (inobund to ccme from the perspective of the router) the Calling party...
Hello,Any news about this problem????? I am having the exact issue, IOS version 12.2(33)SXH7. When the VSL link is brought up, then the secondary switch waits for a reload command given in the console. Normally it has tono reboot automatically accord...
I corrected this, the problem is with VLAN filters on interfaces.interface GigabitEthernet1/1description "Link to DSLAM"switchport trunk encapsulation dot1qswitchport private-vlan trunk allowed vlan 594,608switchport private-vlan association trunk 20...
In this case the AS path prepend will not work, because we have iBGP peering (you and ISP use the same AS number). You could use MED (if your ISP looks at it of course) or conditional route advertising with BGP.HTH.Arber.
Thanks for the prompt response.I changed the upgrade plan to follow these steps:1) Upgrade to CUCM 6.1(2)2) Upgrade to 8.0(2c)3) Backup using DRS4) Install on VM CUCM 8.0(2c)5) Restore backup with DRS6) Upgrade VM to 8.6(1a)In these case we a have a ...
maybe you misunderstood my proposal, there is needed one loopback IP, one on the ISP side and one on customer side. let's say ISP: 1.1.1.1 Customer: 2.2.2.2add two static routes (Customer side)ip route 1.1.1.1 255.255.255.255 ip route 1.1.1.1 255.25...
