About draach-85

draach-85 · 05-25-2021

Hello everybody, I am running into problems with CMS3.2 and the invitation email template. I've configured a working callbridge and webridge3. The spaces and users come from LDAP and I am able to access the personal spaces via SIP and via WebRTC. For...

draach-85 · 09-02-2014

Hello everybody, we updated five Clinical Assistant (SX20) to the suggested TC7.2. Now we got the following problem on all the systems. When the system reboots the presentation mode is activated. The users don't see the normal wallpaper until they ar...

draach-85 · 04-16-2014

Hello everybody, yesterday I updated two VCS-Control and two VCS-Expressway. One pair from X7.2.2 to X7.2.3 and one from X8.1 to X8.1.1. On the VCS-Control everything worked fine, but on both VCS-E update I ran into "problems":The Update cleared some...

draach-85 · 09-18-2013

Hello everybody,from where does the Smart Scheduler gets the time zone? I realized that I configured under "TMS > Administrative tools > User Administration > Users" "(UTC+01:00) Amsterdam, Berlin, Bern, Rome, Stockholm, Vienna" as time zone but when...

draach-85 · 08-05-2013

Hello everybody,in the older tc versions it was possible to set presets via trc5 or touch. Then there was the possibility to configure the presets to be loaded on boot or wakeup. To configure this I had to go to "configuration" > "advanced configurat...

draach-85 · 06-08-2021

Hi Sebastian, thanks a lot, that did the trick.

draach-85 · 01-09-2019

Hi, were you able to fix your problem? I am running in the same problem. We are using a third party app in a custom tab for directory search. I could see the login screen but without any buttons or labels. Also I am not able to login into the applica...

draach-85 · 12-04-2014

Hi Roberto, you need a TMS Demo release key. Insert this release key under "Administrative Tools" > "Configuration" > "General Settings" > "TMS Release Key". If done so, your TMS changes to the given demo release key. The you need some option keys wh...

draach-85 · 09-18-2014

Hi, xConfiguration Video OSD AutoSelectPresentationSource: Off was already configured butxConfiguration Video Input Source [1..3] PresentationSelection: was set to OnConnect. ConfiguringxConfiguration Video Input Source [1..3] PresentationSelection:M...

draach-85 · 08-06-2013

Hi, but I think this should be fixed because it should act the way like before. I also mentioned that the camera on MX300 with TC6.2 does sometimes not drive to the privacy position or to the default position.

Member Since	‎04-03-2012 05:27 AM
Date Last Visited	‎03-27-2024 12:16 AM
Posts	27
Total Helpful Votes Received	34

User Statistics

User Activity

CMS3.2: no webbridge URL in invitation email

TC7.2 on SX20 problem

VCS Uppdate to X8.2.1 or X7.2.3

TMS Smart Scheduler time zone

TC 6.2 preset and standby

Re: CMS3.2: no webbridge URL in invitation email

Re: CSCvb41554 - Custom tabs supported on MRA

Hi Roberto, you need a TMS

Hi, xConfiguration Video OSD

TC 6.2 preset and standby