About evantol

evantol · 01-10-2014

I'm running 15.3(3)S on a group of three ME3600X switches and I'm having some issues testing autoroute announce. I've built a tunnel from one of my ME3600X switches to a remote router and the tunnel is up and accepts traffic from the local switch:P2P...

evantol · 05-08-2013

Hi,I am attempting to set up G.8032 ERPS on our ME3600s that run 15.3(2)S. I want to know the specific procedure to do so on a live, production ring. When I attempt to do this today, the interfaces added as the 'port0' and 'port1' interface immedia...

evantol · 08-22-2012

Hi,It's my understanding that MSTP switches must have the following identical information configured in order for it to participate in a region:NameConfiguration revisionVLAN-to-MSTI mappingDo all VLANs need to be created on all switches in the regio...

evantol · 01-25-2007

While configuring an ME3400 for the first time, I noticed that the physical interfaces offer the ability to enter a 'rate-limit' command. There is also the option to configure policing within a 'policy-map' and attach that to an interface using the ...

evantol · 03-09-2006

Hi,I'm trying to configure traffic policing on a Catalyst 2950. The config is pretty straight-forward, or so I thought. I need to set up several policy-maps, each one policing traffic at different levels (5meg, 10meg, 20meg, etc.). My problem is, ...

evantol · 01-14-2014

I suppose that depends on what you mean by "protect" . For one, if the SVI is in a bridge domain and the SVIs physical interfaces go down, that would cause an event which would force a recalculation of the tunnel, no? Additionally, I would say that...

evantol · 01-14-2014

Thanks, Madhu. What do you feel the best course of action is? Should I open a new case on this or continue logging it to my currently open case.The odd part about my open case is that it seems to be based solely upon destination prefix *length*, wh...

evantol · 01-14-2014

Madhu,That seemed to do it!ME3600X-1.lab#tr 10.10.8.3Type escape sequence to abort.Tracing the route to 10.10.8.3VRF info: (vrf in name/id, vrf out name/id) 1 172.16.32.1 [MPLS: Label 39 Exp 0] 0 msec 0 msec 0 msec 2 172.16.24.149 [MPLS: Label 3022...

evantol · 01-13-2014

Looks like the switch 24 is not able to either impose a tag or swap the tag and send out to next hop.That's what I thought, too, as the traffic is not even leaving the 24 switch, according to packet captures taken between the 24 switch and the 12 rou...

evantol · 01-13-2014

Hi Madhu,Unfortunately, adding 'mpls ip' to the tunnel interface doesn't help - pings still drop from behind the "24" switch. The path is the exact same whether 'autoroute announce' is configured or not:ME3600X-4.lab#traceroute mpls traffic-eng tunn...

Member Since	‎02-06-2003 06:29 AM
Date Last Visited	‎03-04-2020 12:17 AM
Posts	26

User Statistics

User Activity

Autoroute Announce is dropping traffic

ME3600 ERPS Procedures

MSTP Questions

ME3400 - police vs. rate-limit

2950 Traffic Policing

Re: Autoroute Announce is dropping traffic

Re: Autoroute Announce is dropping traffic

Re: Autoroute Announce is dropping traffic

Autoroute Announce is dropping traffic

Autoroute Announce is dropping traffic