Hi,I use the cisco 871 router as a firewall to my home-office. I have configured two vlans for each seperate port. That is, FE0 configured as VLAN 10 ----> connected to Layer 2 Switch FE1 configured as VLAN 20 ----> connected to another ...
Hi Gudmundur,Thank you very much for your reply,Your reply is highly appreciable, i will change the router and let you know the results soon..best regardsMA
Hi,I got 40-45 Mbps when connected to fa0/2.Here is output for fa0/2:Cisco871#sh int fastEthernet 2FastEthernet2 is up, line protocol is up Hardware is Fast Ethernet, address is 0022.55e1.c146 (bia 0022.55e1.c146) MTU 1500 bytes, BW 100000 Kbit, DL...
Hi Sharma,Thank you very much for your response,I have performed the tests by connecting to fa0/2 and temporarly shutting down fa0/1 and fa0/3. Also cleared the counters for fa0/4.During testing I have issued the cpu stats commands.Here is the output...
Hi Joseph,Here is output of sh proc cpu sortedCisco871#sh proc cpu sortedCPU utilization for five seconds: 0%/0%; one minute: 25%; five minutes: 15% PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process 8 1277112 4039900 ...