1damianjones

1damianjones · 04-14-2021

We have a ISR4331 that we use as a voice gateway. Currently it is on version isr4300-universalk9.03....

1damianjones · 08-01-2018

Also sounds like your phones are getting the DHCP from a different source. Do you have consumer acce...

1damianjones · 08-01-2018

Check your DCHP 150 for your TFTP server.

1damianjones · 07-10-2018

@johnd2310 wrote: Hi, Not sure what you are using for the paging system but can you not integrate th...

1damianjones · 07-09-2018

We upgraded from a CME2821 to CUCM11.5. A part of this upgrade was losing the ability to utilize our...

1damianjones · 08-24-2017

Do you have everything the same except a new piece of hardware ? (assuming on old system everything ...

1damianjones · 08-24-2017

Yes, I can dial *89 from any phone and initiate the paging.D.

1damianjones · 08-23-2017

Yes, *89 is what we dial from the phone to activate the paging system.

1damianjones · 08-23-2017

Thanks for the document. That cleared some of the mysterious debug.I also noticed this in the script...

1damianjones · 08-23-2017

I still have the debugs in place but surprisingly still not output on the logs. Here the show log an...

1damianjones · 08-23-2017

From my untrained eye things look in order. Kron statements activate the script :kron occurrence Shi...

1damianjones · 08-23-2017

@yawchen I’m not getting out put on the logs. So that answers the question. I’ll have to create a ne...

1damianjones · 08-22-2017

Thanks. Willdo.

1damianjones · 08-22-2017

how would I put it in debug mode to get the info? I've tried in in the new system and no joy.Thanks ...

1damianjones · 08-22-2017

I'm in the processing of migrating from my cme 2821 to cucm 11.5. One of the last things I need to d...

Date Registered	‎08-03-2005 07:49 AM
Date Last Visited	‎03-03-2022 07:19 AM
Total Messages Posted	32
Total Helpful Votes Received	1

TCL Script not working after upgrade to sr4300-universalk9.16.09.06.SPA.bin